熱搜關鍵詞： 透氣度測定儀骨灰晶石制作機器 Point K型熱電偶（NiCr–NiAl）使用注意事項

您的位置： 洛陽賽特瑞高溫實驗爐Sintering Furnace首頁 > 高溫電爐系列 > 1100℃Three-Zone Split Tube Furnace with 8'' or 11＂ Quartz tube, Flange and ElectricalLid Actuator(40''L Heating Zone)OTF-1100X-11-III -

1100℃Three-Zone Split Tube Furnace with 8'' or 11＂ Quartz tube, Flange and ElectricalLid Actuator(40''L Heating Zone)OTF-1100X-11-III

產品型號：1100℃Three-Zone Split Tube Furnace with 8'' or 11＂ Quartz tube, Flange and ElectricalLid Actuator(40''L Heating Zone)OTF-1100X-11-III

電爐類型：高溫電爐系列

電爐規格：

加熱溫度：

電爐系列：高溫馬弗爐

應用范圍：。

在線咨詢

聯系電話

產品簡介 / Introduction

1100°C Three-Zone Split Tube Furnace with 8'' or 11" Quartz tube, Flange and Electrical Lid Actuator (40''L Heating Zone) - OTF-1100X-11-III

Specification

Furnace structure

、Double layer steel casing with air cooling. The surface temperature of the case is ＜ 70°C. 、Refractory fibrous alumina insulation liner for maximum energy saving. 、Heating element: NiCrAl Resistance Wire 、Two fibrous ceramic tube blocks are included for blocking heat radiation from inside tube. (Ceramic blocks must be fully inserted into the furnace chamber before heating) 、This furnace can be used as annealing or diffusion furnace for 8" wafer use a quartz boat at related product below (for 11'' O.D tube only) 、Electrical lid actuator provides easy amp; hassle free lid opening when seen through the tube chamber or tube replacement is needed.


Structure schematic	11" ceramic tube。 Click to order spare	Holding 8" wafer	Electrical Lid Actuator

Heating zone

、Total heating zone length 100mm (40") 、Three zones: 300 mm + 300 mm + 300mm (12" per zone) 、Constant temperature zone length : 350 mm (if three zones are in the same temperature within +/- 3°C) 、Cross section Temperature tolerance： +/- 3°C

Working temperature

、Max heating temperature: 1100℃ 、Max heating amp; cooling rate: 10°C/min 、SiC heating elements, total 36 pcs

Temperature control

、Three digital controllers with PID/self-tuning functions and 30 segments programmable. 、Thermocouple: three K type thermocouples (one for each zone) Control accuracy: +/- 1°C 、Software for PC control is available as optional ( click picture on the left to order )

European Temperature Controllers (optional upgrade)

、1 heating channel 、1 programs of 8 or 24 segment 、Alarm Relay: Form 'A' and Form ‘C’ built-in 、Digital Communications: RS485 、Temperature Accuracy: ± 0.1oC 、Recipes:Using a PC tool recipes can be created that can be used to change the operating parameters of the 3000 simply by selecting a new recipe via the HMI. This is very useful where multiple products are processed using the same controller but require different parameters to be set.

Fused quartz tube

、Can accomodate 8'' or 11" O.D quartz tube with 71" Length, please select tube size in the option bar 、High purity quart tube, please click the bottom left picture to view. 、Warning: quartz tube is fragile, please handle with care. Warranty does not cover broken tube by useNote: for the needs of higher temperature operation upto 1250C, please consider our FeCrAl alloy tube. Please contact us for more details. Click bottom right picture to view.

Vacuum sealing amp; Flange

、A pair of stainless steel vacuum sealing flange (Hinged Type) and 4 pieces of high temp-resistance silicon O-ring are included in order to achieve the vacuum rate of 10^-2 torr via a heavy-duty mechanical pump. 、Left Side Flange: stainless steel needle valves, and 1/4" barbed hose fitting. 、Right Side Flange: KF40 vacuum port with a vacuum gauge. KF-40 Vacuum Right-Angle Valve is optional for easy connection to KF40 bellows and pump. 、One 1/4" OD thermal couple insert port is built on the right flange for easy temperature calibration.

Optionals

、The tube furnace should be calibrated regularly to maintain the temperature accuracy and uniformity. We are providing a simple calibration kit for you to complete this job at extra cost The complete calibration kit includes (click the underline to see details): o One 48"L ( 1/4"OD) K type calibration thermocouple o One Omega temperature calibrator o 5 feet long thermocouple power extension wire 、You may consider to order turbo pump for hi-vacuum upto 10-5 torr ( click pic below right to order ) 、4'' ~ 8'' large size quartz boats

Rated Voltage

、Three Phase, 208V AC, 50/60 Hz （ 3 phase 380V is optional）、AWG 8# Power cord is included (without plug)

Power consumption

Max. 20KW (100A breaker required)

Product Dimension

2000 Lx765Wx1130 H mm

Net weight

300kg

Shipping dimension

85"x40"x70"

Shipping weight

1200 lbs

Warranty

、One year limited warranty on electrical parts. ( Consumable parts such as processing tubes, o-rings and quartz tube are not covered by the warranty) 、You may order replacement quartz tube at the link below

Laptop, software amp; WiFi Control(Optional)

、Brand new laptop with Microsoft Window 10 and Microsoft Office 2013 (30 days free trial) for immediate use. 、 Temperature Control System (EQ-MTS01)enables user to edit temperature profile, manage heat-treatment recipe, record and plot data for STR-furnaces. 、A wireless remote control provides up to 300 meters operating range. 、Above features are available upon request at an extra cost (up to $1,000). Please contact us for more information.
、Note: The software is only compatible with Yudian Temperature Controller

Compliance

、CE Certified 、UL / MET / CSA Certification is available upon request, additional charges will apply 、Temperature controller is MET and CE Certified

NOTE

、In order to obtain accurate temperature inside the tube furnace,calibration of temperature is require before use, please click here to learn 、How to set up ceramic tube and vacuum flange for STR-Tube furnace

Operation Instructions

Warning

、Tube furnaces with quartz tubes are designed for using under vacuum and low pressure ＜ 0.2 bar / 3 psi / 0.02 MPa or 0.12 MPa (absolute pressure). 、Attention: A two-stage pressure regulator must be installed on gas cylinder to limit the pressure to below 3 PSI for safe operation.Click here to learnthe installation of a gas regulator. 、Vacuum limit definition for all quartz tube furnaces: * Vacuum pressures may only be safely used up to 1000°C 、The flow rate for gases should be limited to＜200 SCCM (or 200ml/min) for reducing thermal shocks to the tube

import(/layout/smh/menubottom.html);

實驗室氣氛實驗爐抗氧化實驗爐開啟式管式爐多工位管式電阻爐

1200℃大口徑滑軌爐管式快速退火爐滲碳爐爐蓋總成鐘罩式金剛石鋸片氫氣保護燒結爐

免責聲明：本站介紹內容（包括產品圖片、產品描述、技術參數等），僅供參考。可能由于更新不及時，或許導致所述內容與實際情況存在一定的差異，請與本公司客服人員聯系確認。內容專業性較強，僅供參考學習，請勿直接采用。本站部分圖片和文字來源于網絡收集整理，僅供學習交流，版權歸原作者所有，并不代表我站觀點。本站將不承擔任何法律責任，如果有侵犯到您的權利，請及時聯系我們刪除。

成功案例Success stories

價格多少錢一臺？

洛陽賽特瑞高溫實驗爐Sintering Furnace始終致力于尖端高溫及加熱產品綜合解決方案。憑借整個集團雄厚的綜合實力、優秀的技術、完善的服務體系，成就了洛陽賽特瑞高溫實驗爐Sintering Furnace可靠的品質。我們生產的質量好，效率高，節能環保，深受國內外廣大客戶的歡迎。價格多少錢一臺? 需要根據詳細技術方案確定

可以加熱到多少度？

是由供應商洛陽賽特瑞高溫實驗爐Sintering Furnace生產的,洛陽賽特瑞高溫實驗爐Sintering Furnace可以加熱到度

溫控表怎么操作?

是由生產廠家洛陽賽特瑞高溫實驗爐Sintering Furnace生產的,可以聯系我們獲得電子版操作說明，以及遠程視頻指導

廠家哪個好?

隨著國內企業生產研發以及高校科研的飛速發展，的需求量日益增加。廠家哪個好?銷售的公司不少，但購買的時候一定要特別注意，要選擇有真正實力，質量可靠，且有專業售后服務團隊的真正生產廠家。本生產廠家洛陽賽特瑞高溫實驗爐Sintering Furnace以高標準、高要求的研發生產理念，確保設備的可靠性！

產品·優勢

PRODUCT ADVANTAGES

外形美觀

外殼由冷軋鋼板折,表面經高速拋丸后靜電噴塑。
密封圈式電纜

可拆卸組合面有密封墊、環、圈、帽。
產品更耐用

推出新型設計方案，結構合理、通用性強、使用壽命高。
按需定制

可按客戶要求定制。

生產基地production base

洛陽賽特瑞高溫實驗爐Sintering Furnace目前共有90余種實驗室設備產品：高溫馬弗爐、、高溫管式爐、氣氛爐、真空爐、熱震爐、結晶爐、火試金爐、箱式爐，常規品足量半成品儲備，快至3個工作日發貨，定制品承諾按期交貨；可根據客戶對產品環境測試的需求，為客戶量身定制性價比高的解決方案及非標定制服務。