熱搜關鍵詞： 彈性模量測定儀智能管式電阻爐耐火制品真密度?測定儀 Tube

您的位置： 洛陽賽特瑞高溫實驗爐Sintering Furnace首頁 > 高溫電爐系列 > 1200℃Muffle Furnace(12x8x5＂, 7.2L) with Vent Port _Quartz Window(208-240VAC)SMG MF1200X -

1200℃Muffle Furnace(12x8x5＂, 7.2L) with Vent Port _Quartz Window(208-240VAC)SMG MF1200X

產品型號：1200℃Muffle Furnace(12x8x5＂, 7.2L) with Vent Port _Quartz Window(208-240VAC)SMG MF1200X

電爐類型：高溫電爐系列

電爐規格：

加熱溫度：

電爐系列：高溫馬弗爐

應用范圍：。

在線咨詢

聯系電話

產品簡介 / Introduction

1200°C Muffle Furnace (12x8x5", 7.2L) with Vent Port & Quartz Window (208-240VAC) - MF-1200X

VBF-1200X-H8 is a UL/CSA standard vacuum furnace. It equips a 7.5" IDx13.4"L Quartz tube chamber sitting horizontally. Water-cooled stainless steel vacuum flanges with valves are installed to achieve a vacuum of 10^-2to10^-5Torr through a mechanical or molecular vacuum pump. It is designed for calcining or annealing semiconductor wafers (up to 6") under vacuum or various other gas atmospheres with a temperature up to 1100°C. It also can also be used as vacuum brazing furnace for fusing small parts.SPECIFICATIONS

Power	、Voltage: Single-phase 208 - 240 VAC / 50/60Hz, (25 A breaker installed) 、3 KW max. 、Note： Power cable included, but without the plug. Please install a plug by your own or click link below the picture to choose a plug according to your country or your lab requirement
Working Temperature	、＜= 1000 ℃continuously 、Max. 1100 °C, ＜ 30 minutes 、Temperature Uniformity: +/- 2°C
Heating Rate	、Max.20°C/ min 、Recommended.10°C/ min
Heating Elements	High-quality Ni-Cr-Al resistance wire as heating elements and can be heated up to 1200°C.
Quartz Tube Size amp; Effective Heating Area	、Tube size:8" O.D.x7.5" I.Dx13.4" L. 、Heating area:7.5" IDx8.5" Depth (7.6Liter) 、Uniform Temperature zone: 4"Diax3.5" depth in center position within +/- 5oC 、The quartz tube is replaceable ( click picture left to order spare tube )
Vacuum Flange(with dual 1/4" feedthrough ports)Note:The standard flange door has upgraded to feedthrough type on Feb 15, 2016.	、Stainless steel vacuum flange with dual high-temperature silicone O-rings at the front door. o One 1/4 gas inlet which allows continuous gas delivery during operation. A gas quartz tube (6.35mm O.D) is provided to reach the location of the sample and deliver reactive gas to sample directly.(Fig A, B) o One 1/4 thermocouple feedthrough port allows a 1/4 O.D thermocouple probe to be inserted into the chamberand measure the temperature of the sample independently. (Fig. C) (Thermocouple is optional. Clickhereto find one). Four probes electric resistance measurement feedthrough also is available upon request. (Fig. D) o MF15x1.5mm Thread for both 1/4" feedthrough o One bored Al2O3 foam refractory block (190Dia * 50mm) is provided. (Fig. F) 、K type 1/4" ODx18" L thermocoupleis included. (Since Apr 2016) (Fig. C) 、Gas Inlet Tube (O.D 6.35mm, I.D 4.0 mm, L 300mm)is included. (Since Apr 2016) Fig. A Fig. B Fig. C Fig. D Fig. F
Options	、The sample holder is not provided with the furnace. You may check the link below to order the sample holder separately. 、Optional Quartz Thermal Block is available upon request as the refractoryblock, which can help achieve higher vacuum level and avoid potential contamination problems,please order Quartz Thermal Block. 、Optional 4 wires ( Pt ) feedthrough is available upon request for electrical properties measurement at the high temperature at extra cost. Flat sample holder Crucible sample holder Quartz Thermal Block 4 wires feedthrough
Gas Inlet and Outlet	、One gas purging inlet (1/4" hose adapter ) with a valve is on the left side of the furnace 、The inert gas can be introduced into the chamber via the inlet for purging purpose. 、If a continuous gas flow is needed, refer to the additional gas inlet and thermocouple probe below.
Water Cooling	A water cooling jacket has been built inside the flange to protect the vacuum sealing assembly from melting at over 300°C. The inlet and outlet ports located on the left side of the furnace are used for connecting to a water chiller through two 12 mm Dia. polyurethane tubes(water chiller is sold separately). Please click the picture below left to order the water chiller.
Pressure Measurement / Monitoring	、Mechanical Vacuum Gauge(included as standard accessory), whichranges from -0.1 to 0.15Mpa. 、Digital Pressure Gauge (optional) A gas-type independent(above 10mbar) digital vacuum gauge with a wide range between 3.8x10^-5to 1125 Torr. Aside from greater measurement precision, this gauge reduces risks of chamber explosionscaused by the incorrect reading of gas pressures due to gas-type dependency.
Vacuum Pressure	、Vacuum Level is dependent on the vacuum pump used, connected pipe, interior refractory block's materials, etc. By using KFD25, stainless steel pipe, STR's two-stage mechanical pump, and KF25 Ball valve, the furnace can achieve vacuum levels below: o 10^-2torr via mechanical pump within 30 minutes without thermal Block o 10^-6torr via turbo-pump within 30 minutes withthe QuartzThermal Block at 900C 、Optional: o Vacuum pump and pipe are not included, please click on BOLD or picture on the optional part below to order. o For achieving a higher vacuum level, aTurbomolecular Vacuum Pump Station is necessary.( click the bottom leftpictureto see detailed specs ) o Spare sealing O-ring is available at extra cost ( click 2nd picture to left below ) o KF25 Right-Angle Valvefor quick connection to KF25 Bellows (click the picture 3 below ).
Temperature Controller	、FA-YD518P-AGtemperature controller is included. 、Proportional–integral–derivative control (PID control) and auto-tune function 、30 segments programmed with ramping, cooling and dwelling steps 、Built-in over-temperature alarm and thermocouple failure alarm 、+/- 1 oC temperature control accuracy 、Default DB9 PC communication port
Temperature controller (optional)	、Temperature control software kit (for YD518P series controllers) + 15" laptop package is available at the options bar. Click for the detail information about the software kit. 、You may upgrade the temperature controller to the Eurotherm 3504 Temperature Controllerwhich is fully compatible with LabVIEW and provides+/- 1°C accuracy. This package includes a Eurotherm 3504 programmer, a communication cable (RS485 - USB) and a software CD. Click the pic below to view the full spec of Eurotherm 3504 temperature controller.
Gas Mixing System (optional)	You may choose a gas mixer to deliver multiple gasses with control over gas composition and flow rate (click pictures below to order separately).
Overall Dimensions	700mm(L)x440mm(W)x435mm(H)
Net Weight	80 kg
Shipping Weight	200 lbs
Shipping Volume	45"(L) x28"(W) x35"(H)
Warranty	、One year limited warranty with lifetime support(consumable parts such as processing tubes, and O-rings are not covered by the warranty, please order replacements at related products below.). 、ATTENTION: Any damages caused by the use of corrosive and acidic gasses are not under the coverage of STR-One Year Limited Warranty.
Compliance	、CE Certified 、Patten Number : ZL-2011-2-0102249.4 SINCE 2011-5-19 、NRTL or CSA certification is available upon request at extra cost.
Warning Click here to learnthe installation of a gas regulator	、Tube furnaces with quartz tubes are designed for use under vacuum condition and at low- pressure levels ＜ 0.2 bars ( 3 PSI ). 、Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation. Click here to learnthe installation of a gas regulator. 、Never heat the furnace while the gas release valve is closed and a positive pressure condition exists within the furnace chamber. The pressure gauge must be used to closely monitor the chamber condition at all times during the heating process; please open the gas release valve immediately once the chamber pressure has reached over 3 PSI to prevent unforeseeable damages. 、A maximum temperature of 1000℃should be imposed on all quartz tube furnaces while running a vacuum to ensure safe operation. Temperatures beyond 1000℃could cause the quartz tubes to undergo deformations under vacuum. 、The flow rate for gasses should be limited to ＜ 200 SCCM for reducing thermal shocks to the tube ( with the output pressure of the gas tank regulated to ＜ 0.2 Bar or ＜ 3 PSI ).
Operation Instructionsamp; Demo video

import(/layout/smh/menubottom.html);

箱式氣氛電爐高溫耐壓試驗機實驗室用小型管式電爐 sx箱式電阻爐

1200℃大口徑滑軌爐管式快速退火爐滲碳爐爐蓋總成鐘罩式金剛石鋸片氫氣保護燒結爐

免責聲明：本站介紹內容（包括產品圖片、產品描述、技術參數等），僅供參考?？赡苡捎诟虏患皶r，或許導致所述內容與實際情況存在一定的差異，請與本公司客服人員聯系確認。內容專業性較強，僅供參考學習，請勿直接采用。本站部分圖片和文字來源于網絡收集整理，僅供學習交流，版權歸原作者所有，并不代表我站觀點。本站將不承擔任何法律責任，如果有侵犯到您的權利，請及時聯系我們刪除。

成功案例Success stories

價格多少錢一臺？

洛陽賽特瑞高溫實驗爐Sintering Furnace始終致力于尖端高溫及加熱產品綜合解決方案。憑借整個集團雄厚的綜合實力、優秀的技術、完善的服務體系，成就了洛陽賽特瑞高溫實驗爐Sintering Furnace可靠的品質。我們生產的質量好，效率高，節能環保，深受國內外廣大客戶的歡迎。價格多少錢一臺? 需要根據詳細技術方案確定

可以加熱到多少度？

是由供應商洛陽賽特瑞高溫實驗爐Sintering Furnace生產的,洛陽賽特瑞高溫實驗爐Sintering Furnace可以加熱到度

溫控表怎么操作?

是由生產廠家洛陽賽特瑞高溫實驗爐Sintering Furnace生產的,可以聯系我們獲得電子版操作說明，以及遠程視頻指導

廠家哪個好?

隨著國內企業生產研發以及高?？蒲械娘w速發展，的需求量日益增加。廠家哪個好?銷售的公司不少，但購買的時候一定要特別注意，要選擇有真正實力，質量可靠，且有專業售后服務團隊的真正生產廠家。本生產廠家洛陽賽特瑞高溫實驗爐Sintering Furnace以高標準、高要求的研發生產理念，確保設備的可靠性！

產品·優勢

PRODUCT ADVANTAGES

外形美觀

外殼由冷軋鋼板折,表面經高速拋丸后靜電噴塑。
密封圈式電纜

可拆卸組合面有密封墊、環、圈、帽。
產品更耐用

推出新型設計方案，結構合理、通用性強、使用壽命高。
按需定制

可按客戶要求定制。

生產基地production base

洛陽賽特瑞高溫實驗爐Sintering Furnace目前共有90余種實驗室設備產品：高溫馬弗爐、、高溫管式爐、氣氛爐、真空爐、熱震爐、結晶爐、火試金爐、箱式爐，常規品足量半成品儲備，快至3個工作日發貨，定制品承諾按期交貨；可根據客戶對產品環境測試的需求，為客戶量身定制性價比高的解決方案及非標定制服務。