熱搜關鍵詞： 耐火材料真密度試驗儀 1400度8L箱式馬弗爐埋入式電極鹽浴爐豆奶生產線項目生產工藝設備

您的位置： 洛陽賽特瑞高溫實驗爐Sintering Furnace首頁 > 高溫電爐系列 > 1200℃Max Sliding Tube Furnace(80mm OD) with Flanges for Fast Heating / CoolingOTF-1200X-80-SL -

1200℃Max Sliding Tube Furnace(80mm OD) with Flanges for Fast Heating / CoolingOTF-1200X-80-SL

產品型號：1200℃Max Sliding Tube Furnace(80mm OD) with Flanges for Fast Heating / CoolingOTF-1200X-80-SL

電爐類型：高溫電爐系列

電爐規格：

加熱溫度：

電爐系列：高溫馬弗爐

應用范圍：。

在線咨詢

聯系電話

產品簡介 / Introduction

1200°C Max Sliding Tube Furnace (80mm OD) with Flanges for Fast Heating / Cooling - OTF-1200X-80-SL

OTF-1200X-80-SL is a CE certified amp; UL Ready slideable tube furnace with 3" IDx55" L Quartz tube and flanges and a maximum working temperature up to 1200°C. One pair of sliding rail is installed on the bottom of the furnace to allow sliding the furnace from one side to another to achieve max. heating and cooling rates up to 100°C/min. For fastest heating,the furnace may bepre-heatedto the desired temperatureand then be slide to the sample's position. As for fastest cooling, the furnace can be slide to another side after sample heatingis completed. Moreover, the heating and cooling rates may reach 15°C/s under vacuum or inert gasses. This furnace provides an alternative for rapid thermal processingat the lowest cost.

SPECIFICATIONS

Furnace Structure

、Double layer steel structure with dual air cooling fans 、One pair of sliding rails are installed on the bottom of the furnace, which allows the furnace to bemanuallymoved from side to side 、Vacuum flanges and adigital vacuum gauge are installed for immediate use. 、Sliding rail length is about 1200mm, the furnace can slide 600 mm distance

Power

2.5KW

Voltage

AC 208-240V Single Phase, 50/60 Hz

Max. Temperature

1200℃(＜1 hour)

Continuous Temperature

1100°C

Heatingamp; Cooling Rates

Heating Rate:15°C/sec (RT - 150°C);10°C/sec (150℃- 250°C); 7°C/sec (250℃- 350°C); 4°C/sec (350℃- 500°C); 3°C/sec (350℃- 550°C); 2°C/sec (550℃- 650°C); 1°C/sec (650℃- 800°C);0.5°C/sec (800℃- 1000°C);

Cooling Rate:15°C/sec (1000 - 950°C);10°C/sec (950℃- 900°C);7°C/sec (900℃- 850°C);4°C/sec (850℃- 750°C);2°C/sec (750℃- 600°C);1.5°C/sec (600℃- 500°C);1°C/sec (500℃- 400°C);0.5°C/sec (400℃- 300°C);

Note:The max heating and cooling rate is achieved by pre-heat one side of processing tube to the target temperature and then slide the furnace to the other side. You may choose to place the sample in the pre-heat area or not.

Heating Zone Length

440mm ( single zone )

Constant Temperature Zone

120mm (+/-1°C 400-1200°C)

Heating Elements

Fe-Cr-Al Alloy doped by Mo

Processing Tube Size

High purity fused quartz tube

O.D. : 3.2" (80 mm)I.D. : 3.0" (75 mm)Length: 55" (1400 mm)

Two foam ceramic blocks are included which must be placed inside tube to avoid heat radiation damaging O-ring

Temperature Controller

、PID automatic control with 30 programmable segments for precise controlof heating rate, cooling rate and dwell time. 、Built-in over temperature alarm and protection allows for operation without an attendant. 、Two K-type thermal couples are included. One is built in the furnace to control furnace temperature, and another inserted into the tube to monitor sample real temperature profile. 、One NIST certified thermometer is included to connect to the thermal couple inside the tube. the meter hasRS232 Interface with Windows Software which can record temperature profile by PC. 、PC control moduleis included. 、Advanced Temperature Control (Optional) o Temperature control software kit (for YD518P series controllers) + 15" laptop package is available at the options bar. Click for the detail information about the software kit. o You may upgrade the temperature controller to the Eurotherm 3504 Temperature Controller which is fully compatible with LabVIEW. This package includes a Eurotherm 3504 programmer, a communication cable (RS485 - USB) and a software CD. Click the pic below to view the full spec of the Eurotherm 3504 temperature controller. o

Temperature Accuracy

+/ - 1°C

Vacuum Flanges

、Stainless steel vacuum flanges are installed on both ends of the tube with heavy duty support. o Right flange: KF-25 pump connector and needle valve. o Left flange:one needle valve and 1/4" thermocouple feed-through anddigital vacuum gauge. o An 24" length x1/4" Dia. K type thermocouple (included) connected to an Omega temperature calibrator (included) will be inserted through this flange tomonitor the heating and cooling rates ofthe sample's position during furnace sliding. 、Click pictures below to see details:


Right Flange	Left Flange	Temp. Calibrator	24" K-type T/C	Digital Vacuum Gauge

Vacuum Level

、Limited by the pump ( pump is not included, click on pictures to order ) o 10E-5 torr can be reached by the molecular pump o 10E-2 torr by a mechanical pump.

Sliding Rails / Table

、Double sliding rail made by Cr-plated steel

、Sliding length: 1200 mm 、One slide stopping clamp is included for holding the position of the furnace.

Dimensions

?550x380x520 mm ( furnace only)

?1500x380x620 mm ( furnace + sliding )

Net Weight

~ 100 Kg

ShippingPackage Size

60"x40"x45" (inch)

Shipping Weight

305 lbs

Warranty

One year limited manufacturer's warranty(Consumable parts such as processing tubes, O-rings and heating elements are not covered by the warranty, please order replacements at related products below).

Laptop, software amp; WiFi Control(Optional)

、Brand new laptop with Microsoft Window 10 and Microsoft Office 2013 (30 days free trial) for immediate use. 、 Temperature Control System (EQ-MTS01)enables the user to edit temperature profile, manage heat-treatment recipe, record and plot data for STR-furnaces. 、A wireless remote control provides up to 300 meters operating range. 、Above features are available upon request at an extra cost (up to $1,000). Please contact us for more information. 、Note: The software is only compatible with Yudian Temperature Controller

Compliance

、CE Certified 、NRTL or CSA certification is available upon request at extra cost. （ please click marks below to learn details )

Application NotesClick here to learnthe installation of a gas regulator

、Tube furnaces with quartz tubes are designed for use under vacuum and low pressure ＜ 0.2 bars / 3 psi / 0.02 MPa 、Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation.Click here to learnthe installation of a gas regulator. 、The flow rate for gasses should be limited to ＜ 200 SCCM (or 200 ml/min) for reducing thermal shocks to the tube 、Vacuum limit definition for all quartz tube furnaces: * Vacuum pressures may only be safely used up to 1000°C 、Click here to learnHow to set up quartz/ ceramic tube and vacuum flange for STR-Tube Furnace. 、If you need faster cooling jar please click the picture below to order aPortable Spot Air Cooling Conditioner. 、Warning: Fast sample cooling can be achieved by sliding the heating chamber away. Please wear protective gears such as heat resistant suit amp; gloves if you intend to do so. DO NOT TOUCH THE TUBE SURFACE WHEN IT IS HOT

Operation Instructions

import(/layout/smh/menubottom.html);

1200度氣氛箱式爐 Slag Elastic 多晶莫來石纖維板

1200℃大口徑滑軌爐管式快速退火爐滲碳爐爐蓋總成鐘罩式金剛石鋸片氫氣保護燒結爐

免責聲明：本站介紹內容（包括產品圖片、產品描述、技術參數等），僅供參考。可能由于更新不及時，或許導致所述內容與實際情況存在一定的差異，請與本公司客服人員聯系確認。內容專業性較強，僅供參考學習，請勿直接采用。本站部分圖片和文字來源于網絡收集整理，僅供學習交流，版權歸原作者所有，并不代表我站觀點。本站將不承擔任何法律責任，如果有侵犯到您的權利，請及時聯系我們刪除。

成功案例Success stories

價格多少錢一臺？

洛陽賽特瑞高溫實驗爐Sintering Furnace始終致力于尖端高溫及加熱產品綜合解決方案。憑借整個集團雄厚的綜合實力、優秀的技術、完善的服務體系，成就了洛陽賽特瑞高溫實驗爐Sintering Furnace可靠的品質。我們生產的質量好，效率高，節能環保，深受國內外廣大客戶的歡迎。價格多少錢一臺? 需要根據詳細技術方案確定

可以加熱到多少度？

是由供應商洛陽賽特瑞高溫實驗爐Sintering Furnace生產的,洛陽賽特瑞高溫實驗爐Sintering Furnace可以加熱到度

溫控表怎么操作?

是由生產廠家洛陽賽特瑞高溫實驗爐Sintering Furnace生產的,可以聯系我們獲得電子版操作說明，以及遠程視頻指導

廠家哪個好?

隨著國內企業生產研發以及高校科研的飛速發展，的需求量日益增加。廠家哪個好?銷售的公司不少，但購買的時候一定要特別注意，要選擇有真正實力，質量可靠，且有專業售后服務團隊的真正生產廠家。本生產廠家洛陽賽特瑞高溫實驗爐Sintering Furnace以高標準、高要求的研發生產理念，確保設備的可靠性！

產品·優勢

PRODUCT ADVANTAGES

外形美觀

外殼由冷軋鋼板折,表面經高速拋丸后靜電噴塑。
密封圈式電纜

可拆卸組合面有密封墊、環、圈、帽。
產品更耐用

推出新型設計方案，結構合理、通用性強、使用壽命高。
按需定制

可按客戶要求定制。

生產基地production base

洛陽賽特瑞高溫實驗爐Sintering Furnace目前共有90余種實驗室設備產品：高溫馬弗爐、、高溫管式爐、氣氛爐、真空爐、熱震爐、結晶爐、火試金爐、箱式爐，常規品足量半成品儲備，快至3個工作日發貨，定制品承諾按期交貨；可根據客戶對產品環境測試的需求，為客戶量身定制性價比高的解決方案及非標定制服務。