Two Zones CSS Furnace With Rotating Wafer Holder up to 5x5＂ at Max.800℃-OTF-1200X-RTP-II-5-R

產品型號：Two Zones CSS Furnace With Rotating Wafer Holder up to 5x5＂ at Max.800℃-OTF-1200X-RTP-II-5-R

電爐類型：高溫電爐系列

電爐規格：

加熱溫度：

電爐系列：高溫馬弗爐

應用范圍：。

在線咨詢

聯系電話

產品簡介 / Introduction

Two Zones CSS Furnace With Rotating Wafer Holder up to 5x5" at Max.800℃ - OTF-1200X-RTP-II-5-R

、Please view "Thin-film Sb2Se3 photovoltaics with oriented one-dimensional ribbons and benign grain boundaries" published by NATURE Photonics, May 18, 2015, in which an STR-tube furnace was used for Thin-film Sb2Se3 photovoltaics Rapid Thermal Evaporation processing.OTF-1200X-RTP-II-5-R is an advanced rapid thermal processing furnace with 11" I.D. quartz chamber and 5“x5" rotating sample holder. It is designed for CSS (Close Spaced Sublimation) film coating up to 5" circular or square wafer samples at the working temperature of 800℃Max.The furnace is heated by two groups of halogen heaters (Top and Bottom) separately with max.10oC/sheating rate. The top sample holder is rotatable to achieve high uniformity coating. It is an excellent tool to research new generation thin film for solar cells, such as CdTe, Sulfide, and Perovskitesolar cell. SPECIFICATIONS:

Furnace structure	、Furnace, two temperature controllers, two-channel gas flowmeters are integrated into a mobile aluminum alloy frame. 、The chamber is made of high purity fused quartz tube with the dimension of 11" OD/10.8" IDx9" H. 、The vacuum flanges are made of Stainless Steel 316 and lifting by the electric motor. 、Two5"x5" IR heating plates and the spacing are adjustable. 、Top sample holder is rotatable at the speed 0 - 7 RPM.
Vacuum Flanges	、Top Flange with one KFD-25 vacuum port and one gas outlet (1/4" pipe required) can slide up or down manually to load and unload substrate and evaporated material easily. 、Bottom flange has one KFD-25 vacuum port with one gas inlet (1/4" pipe required) with needle valves. 、The flange is sealed by double silicone o-rings and can achieve max. the vacuum pressure of 10E-2 Torr by a quality mechanical pump and 10E-5 Torr by a molecular pump (vacuum pump is not included, please order separately). 、One digital vacuum gauge is installed on the top flange. 、Precision anti-corrosion digital vacuum gauge is in standard package(Since 2016.03.24).
Heater and Sample Holder	、Two independently controlled heaters with manuallyadjustable gap from 2 - 30 mm. 、20 pcs Halogen lamps are used as the heating element for rapid thermal processing. 、Heaters are made of stainless steel with water cold jacket to reduce heat radiation and are capable of fast cooling. 、5" Dia. the circular wafer holder is built into the top heater for holding the substrate. 、One set of high thermal-conductive AlN plates (5" Dia.x0.5mm Thick) are included (place on the back of the substrate to make it heat uniformly). 、A 58L/min circulating water chiller is included for saving water source ( click the picture below to see detailed specs). 、Top sample holder is rotatable at adjustable speed 0 - 7 RPM
Temperature Controller	、Two precision digital temperature controllers with 30 segments programmable offer independent controlling of top and bottom heaters. 、Each controller has a PID autotune function to protect heaters from overshooting and an alarm function to prevent overheating from damaging the thermal couples. 、PC communication interface amp; software are installed for (click the picture below for details) recording temperature profile shown as below.
Working Temperature	、The maximum temperature for each heater: ≤ 800oC. 、The maximum temperature difference between the two heaters: ≤ 300oC depends on the spacing between two heaters: o Spacing 30mm Max. temp difference: 315oC heating bottom only
Heating amp; Cooling Rate	、Heating: ＜ 8oC/s ( heating single heater only ) 、Cooling: ＜ 10oC/s (600 - 100oC) Max.
Thermal Couple	Two K-type thermal couples are installed on top and bottom heaters separately.
Working Voltage	208 - 240VAC, single-phase, 50A air breaker
Power Requirement	10 KW total
Dimensions	( click pic to see dimension )
Shipping Weight amp; Dimension	、Two pallets: 525 lbs and 48"x40"x87" and 165 lbs with 39x31x29" dimension
Optional	、One vacuum pump is required. Please order separately by clicking the first picture from the left below. The vacuum level can reach ≤ 10E-2 torr by a mechanical pump. 、If using corrosive gas, please use a cold trap or anti-corrosive dry pump as in picture 2-3 at extra cost. 、You may choose digital MFC gas delivery system by clicking the first picture from the right below.
Warranty	One year limited with lifetime support ( Consumable parts such as quartz tube and heating lamps are not covered by the warranty).
Compliance	、CE Certified 、UL / MET / CSA Certification is available upon request,additional charges will apply. 、Temperature controller is MET and CE Certified.
Operation Instructions
Application Notes amp; Warnings	、The tube furnaces with quartz tube are designed for use under vacuum and low pressure ＜ 0.2 bars / 3 psi / 0.02 Mpa. Vacuum pressures may only be safely used up to 1000°C. The flow rate for gasses should be limited to ＜ 200 SCCM (or 200 ml/min) for reducing thermal shocks to the tube. 、Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation. Click here to learnthe installation of a gas regulator. 、The foot-stand of this furnace is designed for short-distance hauling on the even surface (without pits or bumps) only.
References(Please click right to see related articles)	?Please read the article: High-efficiency CSS CdTe Solar Cell ?UCLA researchers improve the process for manufacturing highly efficient solar cells ?Planar Heterojunction Perovskite Solar Cells via Vapor-Assisted Solution Process ?Sub 150 ℃Processed Meso-superstructure Perovskite Solar Cells with Enhanced Efficiency ?Best_Research-Cell_Efficiencies

import(/layout/smh/menubottom.html);

三溫區管式實驗爐真空氣氛管式實驗爐 GM-M20-17 底部升降真空爐

1200℃大口徑滑軌爐管式快速退火爐滲碳爐爐蓋總成鐘罩式金剛石鋸片氫氣保護燒結爐

免責聲明：本站介紹內容（包括產品圖片、產品描述、技術參數等），僅供參考?？赡苡捎诟虏患皶r(shí)，或許導致所述內容與實際情況存在一定的差異，請與本公司客服人員聯系確認。內容專業性較強，僅供參考學習，請勿直接采用。本站部分圖片和文字來源于網絡收集整理，僅供學習交流，版權歸原作者所有，并不代表我站觀點。本站將不承擔任何法律責任，如果有侵犯到您的權利，請及時聯系我們刪除。

成功案例Success stories

價格多少錢一臺？

洛陽賽特瑞高溫實驗爐Sintering Furnace始終致力于尖端高溫及加熱產品綜合解決方案。憑借整個集團雄厚的綜合實力、優秀的技術、完善的服務體系，成就了洛陽賽特瑞高溫實驗爐Sintering Furnace可靠的品質。我們生產的質量好，效率高，節能環保，深受國內外廣大客戶的歡迎。價格多少錢一臺? 需要根據詳細技術方案確定

可以加熱到多少度？

是由供應商洛陽賽特瑞高溫實驗爐Sintering Furnace生產的,洛陽賽特瑞高溫實驗爐Sintering Furnace可以加熱到度

溫控表怎么操作?

是由生產廠家洛陽賽特瑞高溫實驗爐Sintering Furnace生產的,可以聯系我們獲得電子版操作說明，以及遠程視頻指導

廠家哪個好?

隨著國內企業生產研發以及高?？蒲械娘w速發展，的需求量日益增加。廠家哪個好?銷售的公司不少，但購買的時候一定要特別注意，要選擇有真正實力，質量可靠，且有專業售后服務團隊的真正生產廠家。本生產廠家洛陽賽特瑞高溫實驗爐Sintering Furnace以高標準、高要求的研發生產理念，確保設備的可靠性！

產品·優勢

PRODUCT ADVANTAGES

外形美觀

外殼由冷軋鋼板折,表面經高速拋丸后靜電噴塑。
密封圈式電纜

可拆卸組合面有密封墊、環、圈、帽。
產品更耐用

推出新型設計方案，結構合理、通用性強、使用壽命高。
按需定制

可按客戶要求定制。

生產基地production base

洛陽賽特瑞高溫實驗爐Sintering Furnace目前共有90余種實驗室設備產品：高溫馬弗爐、、高溫管式爐、氣氛爐、真空爐、熱震爐、結晶爐、火試金爐、箱式爐，常規品足量半成品儲備，快至3個工作日發貨，定制品承諾按期交貨；可根據客戶對產品環境測試的需求，為客戶量身定制性價比高的解決方案及非標定制服務。