熱搜關鍵詞： 雙溫區開啟式管式爐 1700度高溫箱式爐真空鎢絲爐水流量平板導熱系數測定儀

您的位置： 洛陽賽特瑞高溫實驗爐Sintering Furnace首頁 > 高溫電爐系列 > 15KW Induction Heating System with 8.5＂ Quartz Tube _Temperature-Controller upto 2000oCSP-85KTC -

15KW Induction Heating System with 8.5＂ Quartz Tube _Temperature-Controller upto 2000oCSP-85KTC

產品型號：15KW Induction Heating System with 8.5＂ Quartz Tube _Temperature-Controller upto 2000oCSP-85KTC

電爐類型：高溫電爐系列

電爐規格：

加熱溫度：

電爐系列：高溫馬弗爐

應用范圍：。

在線咨詢

聯系電話

產品簡介 / Introduction

15KW Induction Heating System with 8.5" Quartz Tube & Temperature-Controller upto 2000oC - SP-85KTC

Induction Heater

Working Voltage: 220V AC, 50/ 60Hz, Three Phases ( 380VAC, 3phase available upon request )Working Current: 5~52 Amps (60A breaker required)Max. Input Power: 15 KW Output Frequency: 30 - 80 kHz Duty Cycle: 80%Induction Coil: 220mm(ID)x65mm(H) Air Cooling: Rear FanProtection: Automatic water pressure, over-temperature, and overpower protectionRefractory Assembling: Complete refractory assembling made of alumina, including bottom crucible support, crucible holder, and cover

Temp. Controller amp; Thermocouple

Precision digital temperature controller with Automatic PID tuning30 segments programmable for controlling heating and cooling rate as well as dwell time.Overheating amp; thermocouple failure protection.+/- 3 oC temperature accuracy.+/- 3 oC temperature accuracy.Thermocouple: C type ( 1/4"x10"L ) ( pls click here to order spare as consumable )Continuous Working Temp. Range: 1000oC~1900oCMax. Working Temperature: 2000oC (for less than an hour)Max. Heating Rate: 4oC/second (1000oC-1200oC)3oC/second (1200oC~1500oC)1oC~2oC/second (1500oC~2000oC)Optional： Eurothermo Controller with +/- 0.5oC accuracy at the extra cost

Graphite Crucible amp; Refractory liners

High Purity Graphite Crucible: 114 mm O.Dx100 mm IDx142mm Height is included for induction heating. Max. Loading Capacity: Up to 1/2 of the total volume of the graphite crucible.Max. melting capability: 4 kg for Iron (tested)Three-layer special design refractory liner can withstand temperature up to 2200C.Note: Graphite crucible is consumable, please click picture below-right to order spare

Sealing Flangesamp; Quartz Chamber

Two-end Open Quartz Tube is included with dimensions of 216 mm(OD)x208 mm(ID)x500mm(L), ( click picture below-left to order spare or replacement )Top Flange: Stainless steel hinged type flange with 1/4'' thermocouple feedthrough, needle valve, and the barb fitting. Please click the picture (bottom right) to view details.Bottom Flange: Stainless steel flange with a needle valve and KF-25 vacuum port. Please click the picture (bottom-left) to view details.KF25 right angle valveamp; clamps and 1000mm long SS bellows are included for connecting to vacuum pump

Pressure Sensor

Anti-Corrosive Capacitance Diaphragm Gauge (Gas Independent), measurement range up to 3.8x10E-5 torrOne 24V,1A DC power adapter is included and ready to use. Input voltage for the adapter is 110~240V Single Phase.

Flow Meter

Compact Direct Read Flow Meter, 100-1000 cc/min. with 1/4NPTAccuracy: 4%Optional: Precision MFC is available upon request at the extra cost

Water Chiller

Temperature range: 5 - 30°CWater Flow Rate: 58 L/mNote: It is recommended to use specific coolant to get the best performance.

Vacuum Pump

One 156 L/m Rotary Vane Vacuum Pumpis includedRate: 156 L/min up to 10e-2 torr vacuum.Max. Power Consumption: 0.4KW / 0.37KWFor US customer, 110V Vacuum pump will be includedIf you choose high-speed turbo-pump, vacuum level can reach 10- 5 torr ( Hi-Speed turbopump)

Heavy Duty Mobile Cart

Structure: Steel Frame Mobile Cart600mm(L)x800mm(W) surface for placing Induction Heater amp; Quartz Tube with Flange

Protective Sheild

For Non Certified version, a protective shield made of phenolic sheets will be provided.For UL Certified version, a clear protective shield made of polycarbonate will be provided.The protective shield is to be placed around the quartz tube to contain the shooting glass shards if accidents were to happen.

Product Dimensions

Please refer to the picture to the left for overall size info.

Warranty

One year limited warranty with lifetime supportConsumable parts such as processing tube, thermocouple, refractory liners, o-rings and heating coil are not covered by the warranty

Compliance

NRTL Certification is available upon request at extra cost, please contact us for a price quote. Certify standards include: 1) Induction heater: UL61010-1 amp; UL499; 2) Vacuum Pump: UL1450; 3) Water Chiller: UL61010 amp; UL1995

Operation Manual amp; Video

Application NotesClick here to learnmore about the installation of a gas regulator.

Attention: Protective inert gas must be continuously filled throughout the experiment in order to protect the graphite crucible and C thermocouple. The gas flow rate should be limited to ＜200 SCCMThe C type thermocouple is consumable which is not covered by manufacturer warranty.Please click hereto learn how to setup crucible for meltingThe Induction Melting System is designed for use under vacuum and low pressure ＜ 0.02 MpaAttention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation.Click here to learnthe installation of a gas regulator.Never heat the furnace while the gas release valve is closed and a positive pressure condition exists within the furnace chamber. The pressure gauge must be used to closely monitor the chamber condition at all times during the heating process; please open the gas release valve immediately once the chamber pressure has reached over 3 PSI to prevent unforeseeable damages.PVT ( Physical Vapor Transportation ) system for growth bulk SiC crystal by changing a suitable crucible, please Pic below or ask our engineers how toThis furnace can be modified as RTP ( rapid thermal processing ) and HPCVD system with the gas delivery system. Please click the link below to see how. If you have any special requirement, please let us know For customization inquiries, please complete the "Customize Induction Heating System Form" and return it to infomtixtl.com

Net Weight

350 lbs

Shipping Weight

TBD

Shipping Dimensions

TBD

import(/layout/smh/menubottom.html);

Furnaces 1400度高溫管式爐核桃蛋白飲料熔模鑄造型殼高溫透氣性試驗機

1200℃大口徑滑軌爐管式快速退火爐滲碳爐爐蓋總成鐘罩式金剛石鋸片氫氣保護燒結爐

免責聲明：本站介紹內容（包括產品圖片、產品描述、技術參數等），僅供參考。可能由于更新不及時，或許導致所述內容與實際情況存在一定的差異，請與本公司客服人員聯系確認。內容專業性較強，僅供參考學習，請勿直接采用。本站部分圖片和文字來源于網絡收集整理，僅供學習交流，版權歸原作者所有，并不代表我站觀點。本站將不承擔任何法律責任，如果有侵犯到您的權利，請及時聯系我們刪除。

成功案例Success stories

價格多少錢一臺？

洛陽賽特瑞高溫實驗爐Sintering Furnace始終致力于尖端高溫及加熱產品綜合解決方案。憑借整個集團雄厚的綜合實力、優秀的技術、完善的服務體系，成就了洛陽賽特瑞高溫實驗爐Sintering Furnace可靠的品質。我們生產的質量好，效率高，節能環保，深受國內外廣大客戶的歡迎。價格多少錢一臺? 需要根據詳細技術方案確定

可以加熱到多少度？

是由供應商洛陽賽特瑞高溫實驗爐Sintering Furnace生產的,洛陽賽特瑞高溫實驗爐Sintering Furnace可以加熱到度

溫控表怎么操作?

是由生產廠家洛陽賽特瑞高溫實驗爐Sintering Furnace生產的,可以聯系我們獲得電子版操作說明，以及遠程視頻指導

廠家哪個好?

隨著國內企業生產研發以及高校科研的飛速發展，的需求量日益增加。廠家哪個好?銷售的公司不少，但購買的時候一定要特別注意，要選擇有真正實力，質量可靠，且有專業售后服務團隊的真正生產廠家。本生產廠家洛陽賽特瑞高溫實驗爐Sintering Furnace以高標準、高要求的研發生產理念，確保設備的可靠性！

產品·優勢

PRODUCT ADVANTAGES

外形美觀

外殼由冷軋鋼板折,表面經高速拋丸后靜電噴塑。
密封圈式電纜

可拆卸組合面有密封墊、環、圈、帽。
產品更耐用

推出新型設計方案，結構合理、通用性強、使用壽命高。
按需定制

可按客戶要求定制。

生產基地production base

洛陽賽特瑞高溫實驗爐Sintering Furnace目前共有90余種實驗室設備產品：高溫馬弗爐、、高溫管式爐、氣氛爐、真空爐、熱震爐、結晶爐、火試金爐、箱式爐，常規品足量半成品儲備，快至3個工作日發貨，定制品承諾按期交貨；可根據客戶對產品環境測試的需求，為客戶量身定制性價比高的解決方案及非標定制服務。