1200℃ High pressure high temperature tube furnace

產品型號：1200℃ High pressure high temperature tube furnace

電爐類型：高溫電爐系列

電爐規格：

加熱溫度：

電爐系列：高溫馬弗爐

應用范圍：。

在線咨詢

聯系電話

產品簡介 / Introduction

Features of 1200℃ High pressure high temperature tube furnace：

1. Heating temperature up to max. 900°C or 1100°C, Depends on tube alloy.
2. Nickel-base super alloy processing tube is included.
3. Max pressure up to 800 PSI.depended on tube alloy.
4. Double layer steel casing with air cooling to keep furnace surface temperature lower than 60°C.
5. High purity fibrous alumina insulation for Max. energy saving.
6. PID automatic control with 30 steps programmable. Automatic over-temperature and thermal broken protection
7. One set of high positive pressure flange.
8. The pressure sensor is installed in the flange. The pressure will be displayed in the pressure controller
in the front panel of furnace. The alarm system is built in the pressure controller which allow user to set
up the high and low limit point of pressure. When the measuring pressure exceed limit point, the alarm
strobe and whistle will be activated for warning.
9. The furnace is able to be controlled by a computer. And the software and USB cable are included.

Descriptions

Tube	Ni based super-alloy ( Waspaloy or equivalent)
Tube	OD 60 x ID 52 x Length 1000 (mm)
Working Pressure vs. Working Temperature	1160 PSI (8.0 Mpa) max. at ≤800°C
	700 PSI (4.8 Mpa) max. at ≤900°C
	348 PSI (2.4 Mpa) max. at ≤1000°C
	230 PSI (1.6 Mpa) max. at 1100°C

	Never heat up above 1100°C
	Pressure calculation based on safety factor 2 for 4,000 hours service life )
Pressure Measurement Range	0~15Mpa
Max. Heating Temperature without Loading	1100°C
Working Gases	Inert gas, hydrogen and oxygen
Heating Temperature	1100°C max.for < 1hr
Heating Temperature	1000C for continuous
Heating Rate	≤20°C/min
Heating Element	Fe-Cr-Al Alloy doped by Mo
Heating Zone	Total length: 440mm Single zone
Heating Zone	Constant temp. zone: 150mm ±1°C
Temp. Control	PID control method with over-temp protection
Temp. Control	Temperature stability: ±1°C
Positive Pressure Sensor	Installed in high pressure flange
PC control	Yes
Pressure Alarm System	Upper limit and lower limit control method
Pressure Alarm System	Alarm strobe and warning whistle
Voltage	AC 220V 50/60Hz
Power	2.5KW
Power	(20A breaker required)
Flanges & Fitting	One pair of CF-63 flange and copper gasket is included
	One 1.5meter long, 1/4" high pressure flexible tube is included for connecting to gas tank and gas-inlet furnace tube. Max. working pressure 200bar.
	Please never use ordinary SS tube to connect to gas-inlet for using > 5Mp pressure, which may cause tube exploded. The safety pressure relief valve is available to be installed at the downstream side.

Note: there are different Chamber(Tube) sizes for your choice.

全自動高溫抗折試驗機 滑動快速加熱冷卻爐電爐加熱元件硅碳棒臺車式回火爐

滑軌爐 1200℃大口徑滑軌爐管式快速退火爐滲碳爐爐蓋總成

免責聲明：本站介紹內容（包括產品圖片、產品描述、技術參數等），僅供參考。可能由于更新不及時，或許導致所述內容與實際情況存在一定的差異，請與本公司客服人員聯系確認。內容專業性較強，僅供參考學習，請勿直接采用。本站部分圖片和文字來源于網絡收集整理，僅供學習交流，版權歸原作者所有，并不代表我站觀點。本站將不承擔任何法律責任，如果有侵犯到您的權利，請及時聯系我們刪除。

成功案例Success stories

價格多少錢一臺？

洛陽賽特瑞高溫實驗爐Sintering Furnace始終致力于尖端高溫及加熱產品綜合解決方案。憑借整個集團雄厚的綜合實力、優秀的技術、完善的服務體系，成就了洛陽賽特瑞高溫實驗爐Sintering Furnace可靠的品質。我們生產的質量好，效率高，節能環保，深受國內外廣大客戶的歡迎。價格多少錢一臺? 需要根據詳細技術方案確定

可以加熱到多少度？

是由供應商洛陽賽特瑞高溫實驗爐Sintering Furnace生產的,洛陽賽特瑞高溫實驗爐Sintering Furnace可以加熱到度

溫控表怎么操作?

是由生產廠家洛陽賽特瑞高溫實驗爐Sintering Furnace生產的,可以聯系我們獲得電子版操作說明，以及遠程視頻指導

廠家哪個好?

隨著國內企業生產研發以及高校科研的飛速發展，的需求量日益增加。廠家哪個好?銷售的公司不少，但購買的時候一定要特別注意，要選擇有真正實力，質量可靠，且有專業售后服務團隊的真正生產廠家。本生產廠家洛陽賽特瑞高溫實驗爐Sintering Furnace以高標準、高要求的研發生產理念，確保設備的可靠性！

產品·優勢

PRODUCT ADVANTAGES

外形美觀

外殼由冷軋鋼板折,表面經高速拋丸后靜電噴塑。
密封圈式電纜

可拆卸組合面有密封墊、環、圈、帽。
產品更耐用

推出新型設計方案，結構合理、通用性強、使用壽命高。
按需定制

可按客戶要求定制。

生產基地production base

洛陽賽特瑞高溫實驗爐Sintering Furnace目前共有90余種實驗室設備產品：高溫馬弗爐、、高溫管式爐、氣氛爐、真空爐、熱震爐、結晶爐、火試金爐、箱式爐，常規品足量半成品儲備，快至3個工作日發貨，定制品承諾按期交貨；可根據客戶對產品環境測試的需求，為客戶量身定制性價比高的解決方案及非標定制服務。