賽特瑞? 智能實驗裝備供應商
集研發設計、銷售、售后維保專業服務商
聯系電話：
聯系電話：
熱搜關鍵詞： STR-M3-17 立式真空淬火爐 爐體滑動管式爐 實驗室用小型管式電爐
產品型號：1100℃Three Zone Super-Alloy High Pressure Tube Furnace with Gas Flow Control SystemOTF-1200X-HP-III-80-GF
電爐類型：高溫電爐系列
電爐規格：
加熱溫度：
電爐系列：高溫馬弗爐
應用范圍：。
OTF-1200X-HP-III-80-GF is a high-pressure tube furnace with three heating zones and gas flow control system as well as a protective frame. The processing tube is made of Ni-based superalloy with 50 mm ID, which can be heated to max.1100℃under high-pressure of both oxygen and inert gases with controlled flow rate. The furnace originally is designed for processing Fe-based superconductive material, also can be used for exploring new generation oxide ceramic as a compact HIP.
| Furnace | 、Splitable Three heating zone tube furnace with air cooling layer 、High quality fibrous insulation and reflective coating for max. energy saving. 、Power: 208 - 240VAC 50/60Hz , 4KW max. |
| Heating Zone | 、Three heating zones: 150mm + 150mm + 150 mm 、Total heating zone length： 450mm 、Constant temp. zone: 300mm ±5°C |
| Working Temperature | 、1100℃max.for ＜ 1hr 、1000℃for continuous 、Heating rate: ≤10°C/min |
| Temperature Control | 、Three precision digital temperature controller with 30 segments programmable 、PID control method with protection of over-temp. and thermal couple broken 、Temperature stability: ±1°C 、PC control software and laptop computer are included for PC operation |
| Thermocouple | ?Omega 3mm OD K Typewith high-temperature (220°C) connector |
| Process Vessel amp;Safety Frame | 、Pressure vessel is made of Nickel based superalloy GH747 (Click to download GH747 nickel based alloy datasheet) 、Vessel size: OD 85xID 50xLength 1000 (mm) 、Pressure vessel is located inside a steel frame to avoid flange flying out by accident ( see picture below ) and ensure a safe operation. 、Optional: torque wrench is available hereto avoid over-tighten the flange bolts. 、Warning: Never put sample inside tube directly without crucible or isolated foil to avoid sample react with tube alloy. |
| Working Pressure vs. Working Temperatue | Pressure calculation based on safety factor 3. 、140 Bar max. at 800°C 、80 Bar max. at 900°C 、40 Bar max. at 1000°C 、2.5 Bar max. at 1100°C 、Never heat up above 1200°C |
| Working Gases | 、Inert gas and oxygen 、No hydrogen or any flammable gas |
| Flange and Fitting | 、Two CF type flanges are weld with female 1/4"NPT fitting to connect high-pressure tube 、2 pcs Copper o-rings are included ( spare copper O-ring is available as consumable ) 、One pair of water cooling ring , made of cupper tube , is installed on two ends of the tube ( gt; 10 liter / min water flow is required) 、One 16L/min flow rate recirculating water chilleris included as a cooling system to save water. |
| Gas Flow System | 、Gas control system is built ina heavy duty mobile tableunder furnace and safety frame ?Three pressure sensors and digital displays are installed to monitor furnace pressure for gas inlet, inside tube and gas flow end separately ?One high-pressure mass flow controller is built in gas outlet to control gas flow rate with max. 10Mpa working pressure and 500 MCC flow rate laptop via included software for remote monitoring and controlling 、Three adjustable pressure release valves are installed to ensure safety. The valve will release gas when pressure reaches setting point. |
| Dimension amp; Weight | 、Dimension: 1200 Lx600 Dx1540 H,mm （ includes furnace， pressure control table and safety frame 、Net weight: 180 kg |
| Operation Instruction | |
| Compliance and Warranty | ?All electric components ( gt;24V) are UL or MET listed, and ready to pass TUV, UL or CSA certificate on feild at extra cost ( click mark to learn what is ) 、One year limited warranty for lifetime support |
| Application Notes | ?Hytort Application, or named Hydroretorting of Shale Oilis a process developed by IGT to double the yield of shale oil and hydrocarbon gases. STR-High-Pressure furnaces with Ni-based superalloy tube is an ideal tool for conducting related experiments. Please click underlined to view research paper. |
| Safety Notes | 、Ni-based Superalloy ( Waspaloy or equivalent) is a reliable processing tube which can be used under high temperature and high pressure.. It has excellent ductility and tensile property so only creep deformation happens under overpressure destruction test and following by a crack formed (usually at the hot zone at the center of tube) to release the pressure. Brittle fracture won’t happen in the overpressure destruction test which means no tube explosion will happen under overpressure of inert gas or safe gas or under other accidents causing overpressure of inert gas or safe gas. Thepics show Ni-based Super-alloy processing tube under overpressure test 、Warning： Never put sample inside tube directly without crucible or isolated foil to avoid sample react with tube alloy. 、Attention: For the use with flammable, toxic or corrosive gases, you must contact STR-engineering group for the consultation to know all the prerequisites and precautionary measures. 、Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure to below 3 PSI for safe operation. Please click here to learn how to install the gas regulator. |
| Optional Assessories | 、To measure the electric properties of thermoelectric ceramics under high pressure amp; temperature conditions, please order alumina testing fixture and high pressure electrical feedthrough (10Mpa Max.) with the furnace (additional fee will apply). |
STANDARD PACKAGE
| P/N | Name | Qty |
| Tube Furnace main machine amp; operation manual | 1 | |
| Processing vessel | 1 | |
| High pressure flange w/ positive pressure sonser | 1 | |
| Vacuum flange KF40 and KF25 connector | ||
| 1.5 meter long, 1/4" high pressure tubes are includedfor connecting to gas tank and gas-inlet furnace tube conflat flange for positive pressure or vacuum | 2 | |
| EQ-KJ5000 | Circulating water chiller | |
| KF-Valve-D40 | KF-40 right-angle valve | 1 |
| KF-Clamp-D40 | KF-40 quick clamp | 2 |
| KF-Clamp-D25 | KF-25 quick clamp | 1 |
| KF-BF25 | KF-25 Blank flange fittings | 1 |
| ORing-Cu82 | Oxygen-free copper gasket | 3 |
| FLG-kit-2 | Furnace hook | 1 |
| PC control software and interfaceand brand name Laptop computer | 1 |
下開門馬弗爐 高真空釬焊爐 雙爐膛馬弗爐 耐火磚荷重軟化溫度
1200℃大口徑滑軌爐 管式快速退火爐 滲碳爐爐蓋總成 鐘罩式金剛石鋸片氫氣保護燒結爐
免責聲明：本站介紹內容（包括產品圖片、產品描述、技術參數等），僅供參考。可能由于更新不及時，或許導致所述內容與實際情況存在一定的差異，請與本公司客服人員聯系確認。 內容專業性較強，僅供參考學習，請勿直接采用。本站部分圖片和文字來源于網絡收集整理，僅供學習交流，版權歸原作者所有，并不代表我站觀點。本站將不承擔任何法律責任，如果有侵犯到您的權利，請及時聯系我們刪除。
洛陽賽特瑞高溫實驗爐Sintering Furnace始終致力于尖端高溫及加熱產品綜合解決方案。憑借整個集團雄厚的綜合實力、優秀的技術、完善的服務體系，成就了洛陽賽特瑞高溫實驗爐Sintering Furnace可靠的品質。我們生產的質量好，效率高，節能環保，深受國內外廣大客戶的歡迎。價格多少錢一臺? 需要根據詳細技術方案確定
是由供應商洛陽賽特瑞高溫實驗爐Sintering Furnace生產的,洛陽賽特瑞高溫實驗爐Sintering Furnace可以加熱到度
是由生產廠家洛陽賽特瑞高溫實驗爐Sintering Furnace生產的,可以聯系我們獲得電子版操作說明，以及遠程視頻指導
隨著國內企業生產研發以及高校科研的飛速發展，的需求量日益增加。廠家哪個好?銷售的公司不少，但購買的時候一定要特別注意，要選擇有真正實力，質量可靠，且有專業售后服務團隊的真正生產廠家。本生產廠家洛陽賽特瑞高溫實驗爐Sintering Furnace以高標準、高要求的研發生產理念，確保設備的可靠性！
外殼由冷軋鋼板折,表面經高速拋丸后靜電噴塑。
可拆卸組合面有密封墊、環、圈、帽。
推出新型設計方案，結構合理、通用性強、使用壽命高。
可按客戶要求定制。
洛陽賽特瑞高溫實驗爐Sintering Furnace目前共有90余種實驗室設備產品：高溫馬弗爐、、高溫管式爐、氣氛爐、真空爐、熱震爐、結晶爐、火試金爐、箱式爐，常規品足量半成品儲備，快至3個工作日發貨，定制品承諾按期交貨；可根據客戶對產品環境測試的需求，為客戶量身定制性價比高的解決方案及非標定制服務。
Phone
微信Wechat
郵箱Emailsaiterui#qq.com 
電話：
郵件：
