High Pressure Swing Tube Furnace Iwith Super-Alloy Tube up to 1100℃-OTF-1200X-HPR-III

產品型號：High Pressure Swing Tube Furnace Iwith Super-Alloy Tube up to 1100℃-OTF-1200X-HPR-III

電爐類型：高溫電爐系列

電爐規格：

加熱溫度：

電爐系列：高溫馬弗爐

應用范圍：。

在線咨詢

聯系電話

產品簡介 / Introduction

High Pressure Swing Tube Furnace Iwith Super-Alloy Tube up to 1100°C - OTF-1200X-HPR-III

OTF-1200X-HPR-III-80 is a high-pressure rocking tube furnace with three heating zones. The processing tube is made of a Ni-based superalloy. It is designed for heat treatment materials under both high positive pressure with inert gas. The furnace can be heated up to a max. 1100℃at 2.5 bar pressure (or 900℃at 80 bars). It is designed for melting alloy or compound which is easy to evaporate under atmosphere.SPECIFICATIONS

Structure	、Split-able tube furnace with three heating zone with the indenpendent temperature controller. 、Each zone length of 200 mm and 600 mm in total length. 、Constant temperature zone is about 300 mm with +/- 3oC 、The furnace can be swung from -30o to + 90oan electric motor at the frequency range of 0.1 - 1 time/min 、1100 ℃max.for ＜ 1 hour 、≤ 1000 ℃continuous
Power	、AC 208 - 240V 50/60Hz 、4.2 KW (32 A breaker required)
Working Pressure	、200 bar Max. at 650 °C 、40 bar Max. at 800 °C 、25 bar Max. at 900 °C 、12 bar Max. at 1000 °C 、8 bar Max. at 1100 °C 、Never heat up above 1200°C 、This furnace also can achieve high vacuum up to 10-6 torr by the turbopump
Working Gases	、Inert gas or oxygen 、No hydrogen or any flammable gas is allowed
Heating Rate	、0 – 200 °C: ≤ 10 °C/min 、200 – 700 °C: ≤ 6 °C/min 、700 – 900 °C: ≤ 3 °C/min 、900 – 1100 °C: ≤ 1 °C/min
Cooling Rate	、1100 – 800 °C: ≤ 5 °C/min ?800 – 200 °C: ≤ 10 °C/min ?200 – 0 °C: free cooling
Heating Zone	、Three heating zones: 150 mm + 150 mm + 150 mm 、Total heating zone length： 450 mm 、Constant temp. zone: 280 mm ±1°C
Heating Element	、Fe-Cr-Al Alloy doped by Mo
Thermocouple	、ThreeOmega K-typethermocouples (OD 3 mm) in the furnace
Temperature Control	、Three precision digital temperature controller with 30 programmable segments and +/- 1 oC accuracy 、Safety protection of over-temperature and broken thermocouples are integrated 、PC control software is available at extra cost 、Eurotherm precision temperature controller with +/-0.1℃accuracy is available upon request at the extra cost.
Control Unit	、Control panel is separated from the furnace for safe operation 、Temperature, pressure, and gas flow rate are controlled via the touch screen panel.
Process Vessel	、Made of Nickel-based superalloy 、Vessel Size: OD 60xID 52xL1200 (mm) 、Working gasses: O2 and inert gasses such as N2, Ar, and He 、In or der to melt the alloy or compound which contains the element that is evaporated easily, you may put the sample into a graphite or BN tube with a screw cap as Pic. below the middle ( ( the crucible is available upon request ) 、To fix the sample tube in position during the swing, two ceramic or stainless steel rod with the thermal block is built in the flanges ( see picture right below ) 、Warning:Never put the sample inside the tube directly without crucible or isolated foil to avoid sample react with tube alloy. 、Attention: Processing tube is a consumable part. Please click the photo below to order a replacement or a spare one
Pressure Sensor and Valve	、Pressure gauge with range of 0 – 25 MPa and over-pressure alarm is installed (downstream side) 、Pressure control valve with a working range of 0.2 – 15 MPa is installed (the upstream side with 1/4" BSPP venting port) 、If the measured pressure reaches the high-pressurealarm value, the pressure control valve will be opened until the pressure drops 0.2 MPa (2 bars) below the alarm value 、The manual pressure relief valve is installed for manual pressure control and relief (the downstream side with 1/4" BSPP gas outlet port)
High-pressure relief valve	、Safety pressure relief valve is recommended (the upstream side with 1/4" NPT venting port) 、Please info us your application temperature and we will pre-set the release pressure for you. For example, you need to heat to 800C, the Max working pressure should be 140 bars, we will pre-set the relief valve to 140 bars.
Flange and Fitting	、A pair of 63 mm CF type flanges are included. Please use atorque wrench(optional, not included) to avoid over tightening the flange bolts. 、2 pieces ofcopper O-rings(99 mm ODx82 mm IDx2.2 mm thickness) are included. Please order extra copper O-ring as consumable parts 、A pair of cooling fans are included for air cooling the flanges 、One mobile cart with installation holes isincludedfor easy setup and immediate use
Dimension
Optional Parts(with extra cost)	、Please order heavy-duty rotary vane vacuum pump (7.8 CFM, 240 L/min) –EQ-YTP-50for low vacuum operation (Pic #1) 、If high vacuum operation is needed, please consider the turbomolecular vacuum pump station–EQ-PV-HVS2(Photo #2) 、Gas flow control system is available upon request (Photo #3) 、Please use a torque wrench(optional, not included) to avoid over tightening the flange bolts (Photo #4) 、To measure the electric properties of thermoelectric ceramics under high pressure amp; high- temperature, please order alumina fixture and high-pressureelectrical feedthrough (10 MPa max) with the furnace at extra cost (Photo #5 amp; #6) 12 3 4 5
Operation Instruction
Safety Notes	、Ni-based superalloy (Waspaloy or equivalent) is a reliable material which can be used under high temperature and high pressure. It has excellent ductility and tensile properties. Only creep deformation happens under overpressure, and cracks are usually formed at the center of the tube to release the pressure. Brittle fracture and tube explosion will not happen. Left pics shows Ni-based Superalloy processing tube under overpressure test 、DO NOT overtighten the flange screws as this may cause permanent damage to the flange or screws. Please refer tothe instructionabout proper torque for installing CF flange bolts. We recommend you to use a torque wrench to tighten the screws with the flange 、DO NOT operate the furnace at a temperature/pressureabove the safety limit that STR- recommends 、Extreme caution should be exercised while operating within the vicinity of the high- pressurefurnace. The operator should NEVER stand in front of the flanges, gasinlet/outlet, or the pressure relief valve while the tube is pressure loaded! NEVER face on the gasinlet/outletand the pressure relief valve to avoid injury from high pressure, hot gas discharge 、Attention: A two-stage pressure regulator must be installed on the gas cylinder to limit the pressure for safe operation. Please click here to learn how to install the gas regulator. 、For the use with flammable, toxic or corrosive gasses, you must contact STR-engineering group for the consultation to know all the prerequisites and precautionary measures

import(/layout/smh/menubottom.html);

雙面磨油管伴熱加熱器 1600陶瓷纖維板連鑄保護渣熔化溫度試驗爐

1200℃大口徑滑軌爐管式快速退火爐滲碳爐爐蓋總成鐘罩式金剛石鋸片氫氣保護燒結爐

免責聲明：本站介紹內容（包括產品圖片、產品描述、技術參數等），僅供參考?？赡苡捎诟虏患皶r(shí)，或許導致所述內容與實際情況存在一定的差異，請與本公司客服人員聯系確認。內容專業性較強，僅供參考學習，請勿直接采用。本站部分圖片和文字來源于網絡收集整理，僅供學習交流，版權歸原作者所有，并不代表我站觀點。本站將不承擔任何法律責任，如果有侵犯到您的權利，請及時聯系我們刪除。

成功案例Success stories

價格多少錢一臺？

洛陽賽特瑞高溫實驗爐Sintering Furnace始終致力于尖端高溫及加熱產品綜合解決方案。憑借整個集團雄厚的綜合實力、優秀的技術、完善的服務體系，成就了洛陽賽特瑞高溫實驗爐Sintering Furnace可靠的品質。我們生產的質量好，效率高，節能環保，深受?chē)?guó)內外廣大客戶的歡迎。價格多少錢一臺? 需要根據詳細技術方案確定

可以加熱到多少度？

是由供應商洛陽賽特瑞高溫實驗爐Sintering Furnace生產的,洛陽賽特瑞高溫實驗爐Sintering Furnace可以加熱到度

溫控表怎么操作?

是由生產廠家洛陽賽特瑞高溫實驗爐Sintering Furnace生產的,可以聯系我們獲得電子版操作說明，以及遠程視頻指導

廠家哪個好?

隨著國內企業生產研發以及高?？蒲械娘w速發展，的需求量日益增加。廠家哪個好?銷售的公司不少，但購買的時候一定要特別注意，要選擇有真正實力，質量可靠，且有專業售后服務團隊的真正生產廠家。本生產廠家洛陽賽特瑞高溫實驗爐Sintering Furnace以高標準、高要求的研發生產理念，確保設備的可靠性！

產品·優勢

PRODUCT ADVANTAGES

外形美觀

外殼由冷軋鋼板折,表面經高速拋丸后靜電噴塑。
密封圈式電纜

可拆卸組合面有密封墊、環、圈、帽。
產品更耐用

推出新型設計方案，結構合理、通用性強、使用壽命高。
按需定制

可按客戶要求定制。

生產基地production base

洛陽賽特瑞高溫實驗爐Sintering Furnace目前共有90余種實驗室設備產品：高溫馬弗爐、、高溫管式爐、氣氛爐、真空爐、熱震爐、結晶爐、火試金爐、箱式爐，常規品足量半成品儲備，快至3個工作日發貨，定制品承諾按期交貨；可根據客戶對產品環境測試的需求，為客戶量身定制性價比高的解決方案及非標定制服務。